PLUS Suppemental Items

“Everything that makes fischertechnik more attractive. The fischertechnik supplemental sets create light, movement and additional fun for every model.”

Jadi secara singkat, plus suppemental items ini berfungsi sebagai komponen pelengkap buat modul-modul fischertechnik lainnya, supaya modul tersebut menjadi lebih menarik dan lebih modern. Berikut jenis-jenisnya..

Sound + Lights

Sound + Lights

If you want to breathe more “life” into the Fischertechnik models using sounds and lights then the “Sound + Lights” set is the ideal solution. Up to three different sounds, which can be activated with push buttons or automatically with digital inputs, are available on the sound module. Depending on the requirement, the sounds can be replaced very simply per USB. The blink connection, which is also included, allows the operation of up to six lights as blinking lights. The set contains a sound module with blink electronics, a USB cable, two lights with various colored luminous caps and a battery tray for a 9V block (battery not included). [30 components]

Mini Motor SET

Mini Motor SET

The universal motor set with Mini Motor, 9V battery holder and many gear unit parts: gear wheels, angular gear, differential and universal joint etc. Performance data: Voltage 9V, maximal output 1.1 W at 5000 rpm. [50 components]

Accu Set

Accu Set

Charger, which is controlled by a microcontroller and provides reliable protection against overcharging. Very short charging time, max. two hours, powerful NiMH rechargeable battery pack with fuse for protection against a short circuit, 8.4V, 1500mAh. [Charger + battery pack in one]

Creative Box 1000

Creative Box 1000

More than 700 components from the current Fischertechnik assortment. Packed in BOX 1000 with building board, 390×270 mm, as cover. [700 components + 8 sorting boxes]

Control Set

Control Set

The three channel infrared remote control allows you to control Fischertechnik models from a distance as well. Up to three motors and one servo can be driven proportionally. This means an infinitely variable turning angle of the steering wheel and infinitely variable speed control. Up to four receivers can be operated with the remote control; which allows numerous operational possibilities. The set contains a controller, receiver and a servo. [controller, receiver, servo]

Power Motor Set

Power Motor Set

The powerful gear unit motor with toothed wheels, worm gear, differential, pole-reversing switch, cable and plug. [35 components]

  • Performance data: Voltage 9V, max. output 2.4 W at 340 rpm, gear reduction 8:1.
  • Additionally required is Energy Set or Accu Set.
Energy Set

Energy Set

The power supply from the electrical socket for all Fischertechnik models. Output 9V, 1000 mA. [power unit + control unit in one]

Box 1000

Box 1000

Practical storage box with eight sorting boxes and 32 sorting partitions. The cover also serves as the big building board, 390 x 270 mm. [8 sorting boxes, big building blocks]

Robo Interface

Robo Interface

With 16 bit microcontroller, USB and serial interface, 128kB flash storage unit for downloading 2 programs.

  • 4 adjustable motor outputs 9V/250mA
  • 8 digital inputs
  • 2 analog inputs for resistor 0 to 5 kΩ
  • 2 analog inputs for voltage 0 to 10V
  • 2 analog inputs for gap sensors
  • One connection each for “ROBO I/O Extension” module and radio interface “ROBO RF Data Link” interface for “IR Control Set”
  • Programmable with “ROBO Pro” or C-Compiler (not contained in scope of delivery)
  • Requires Energy Set or Accu Set
ROBO I/O Extension

ROBO I/O Extension

Expansion module for “ROBO Interface”. Connection using a 10-pin ribbon cable. USB interface for online operation directly on the PC. Connection for additional “ROBO I/O Extension” with up to 3 in a series.

  • 4 adjustable motor outputs, 9V, 250 mA
  • 8 digital inputs
  • 1 analog input for resistances of 0 to 5 kΩ
  • Requires Energy Set or Accu Set
Robo Pros Software

Robo Pros Software

Simple entry for beginners through programming of flow charts consisting of various software building blocks. The exchange of the data between the software building blocks and the subprograms can be done through variables and graphical connections as well. This allows the program functions to be shown in an understandable manner.There are no rpoblems with the preparation of teaching programs or data exchange with other Windows software. In an online mode, several ROBO Interfaces can be controlled parallel for big models.

Robo RF Data Link

Robo RF Data Link

Radio interface for “ROBO Interface”. Connection to the PC at the USB interface. Connection to the interface as an additional printed circuit board, which is plugged into the interface printed circuit board. Range is about 10m. 79 adjustable frequncies for simultaneous operation of 8 devices in one room. Direct communications between 8 “ROBO Interfaces” with the same frequency is possible.

  • Frequency 2.4 GHz
  • No additional power supply is needed

So, that’s all for our product… If you do interest with our products, just call us or email at:

MITRA SARANA DISTRIBUSI

Jalan Pengayoman Ruko Alfa No. 13

Telp. (0411) 454543 Fax. (0411) 420422

Email: fischertechnikmsd@gmail.com

Or the easiest way, just leave any comment in our blog..

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: